MT6357CRV Compatible Models (MediaTek MT6357 Power Ic Specs)

MediaTek MT6357CRV Power Ic Compatible Model List

MT6357CRV


There is a list of mobile phones which has MT6357CRV as a power management IC:

  • Huawei Honor 8A
  • Infinix Hot 10 Play
  • Infinix Hot 7 Pro
  • Infinix Hot 9
  • Infinix Note 7 Lite
  • Infinix X650C
  • Infinix S5
  • Infinix S5 Pro
  • Lenovo A6 Note
  • Lenovo K9
  • Lenovo TB-505
  • Lenovo TB-8705F
  • Lenovo K5S
  • Motorola E6 Plus
  • Motorola XT-2229
  • Nokia 3.1 Plus
  • Nokia G20
  • Oppo A1K
  • Oppo A73S
  • Oppo A15
  • Oppo A31
  • Oppo A54
  • Oppo A8
  • Oppo A15S
  • Oppo A16
  • Oppo A35
  • Oppo A5S
  • Oppo A57 4G 2022
  • Realme C2
  • Realme C11 (MTK)
  • Realme C12
  • Realme C15 MTK
  • Realme C20
  • Realme C21
  • Samsung SM-A107
  • Samsung SM-A125
  • Samsung SM-T225
  • Samsung SM-A037
  • Samsung SM-A107M
  • Samsung SM-M125
  • Tecno KG5
  • Vivo Y12
  • Vivo Y12S
  • Vivo Y15
  • Vivo Y17
  • Vivo Y1S
  • Vivo Y30
  • Vivo Y30i
  • Vivo Y81i
  • Vivo Y83
  • Vivo Y91C
  • Vivo Y12S
  • Vivo Y15S
  • Vivo Y21
  • Vivo Y81i
  • Vivo Y16
  • Vivo Y02S
  • Vivo Y01
  • Xiaomi Mi Play
  • Xiaomi Redmi 16
  • Xiaomi Redmi 9C
  • Xiaomi Redmi 6
  • Xiaomi Redmi 6A
If you find this MT6357CRV PMIC on another phone not listed above please inform me on comments too add it to list.

Comments

Post a Comment

Popular posts from this blog

V1SE Wifi Kit installation (Full steps)

Image
 JC V1SE Wifi Kit Installation When you upgrade V1SE to new version (V7.95) and your device has no wifi module, then you face with this notification on your device  The V1SE you are using is a non-wifi version, you can colsult the merchant to upgrade the WIFI version. There is a module makes V1SE to able to connect wifi networks. When you want to use non removal dot projector flexes you need a network connection on V1SE to activate dot projector flex. You can get free the kit is on the image below from your merchant whom you buy v1se from. I can't say it's very easy to install, you need good soldering ability to install it! Hardware Changes To disassamble the V1Se; Remove the battery cover Remove the battery Unscrew the 4 screws on the back of the device. Unplug back cover of device Take of the board, be carefull of the LCD screen, and its flex Unplug LCD and cut the sponge like image below use two sided tape to stick wifi kit to main board Wire G tp on the module to Pt1 on th...
Read more

Sony Xperia XA1 Ultra Boot Repair G3221 with UFI (DONE)

Image
Sony Xperia XA1 Ultra Bricked! Case:   XA1 Ultra is flashed with wrong firmware (another type of XA1 ultra < he said G3223 >, but not G3221) and can not be flashed by Setool anymore! Setool find the phone for the first time (over MTK Port) by pressing vol dn and connecting usb cable and result an error like below: PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ... S1BOOT NOT DETECTED FAILED TO SETUP PHONE Elapsed: 5 seconds Solution: XA1 ultra has 32gb emmc ( HBG4a2, SK Hynix ) BGA 221 package, not epoxied, there is no glue under the chip, so easy to remove from board. Emmc boot config should be enabled for Boot Partition 1 .  I removed the chip, reballed and connected it to UFIBOX, there was no any abnormal situation with the chip, boot config was correct, partitions are ok. I have another alive XA1 Ultra G3221, I removed the emmc chip and read boot1, boot2 partitions and  and exdcsd.bin. Just wrote these files to bricked on...
Read more